concept
- Transparency: P C plate light up to 89%, with the glass phase of the United States.
- Anti-impact: impact strength is 250-300 times the ordinary glass, the same thickness
of the acrylic plate 30 times, is 2-20 times the tempered glass, with 3kg hammer following two
meters fall no cracks, “not broken glass” and “Ring steel” reputation
- UV protection: PC board coated with anti-ultraviolet (UV) coating, the other side with
anti-condensation treatment, set anti-ultraviolet, anti-drip anti-deodorant function in one.
- Light weight: only half the proportion of glass, saving transportation, removal, installation
and support the cost of the framework.
- Flame retardant: national standard GB50222-95 confirmed, PC board for the flame level,
- that B1 level. PC board itself is 580 degrees Celsius ignition, self-extinguishing from the fire,
burning will not produce toxic gases, will not contribute to the spread of fire.
- Flexibility: according to the design of the site at the site using cold-formed, installed into arched,
semi-circular roof and window. The minimum bending radius is 175 times the thickness of the plate and
can also be hot-rolled.
- Sound insulation: PC board sound insulation effect is obvious, than the same thickness of the glass and subgravity
board has better sound insulation, in the same thickness under the conditions of PC board insulation than glass increased 3-4DB.
- Energy saving: summer cool, winter insulation, PC board is lower than the ordinary glass and other plastic thermal conductivity
(K value), insulation effect 7% -25% higher than the same glass, PC board insulation up to 49%.
- Temperature adaptability: PC board at -100 degrees Celsius does not occur when the crisp, at 135
degrees Celsius is not softened, in harsh environments, its mechanical, mechanical properties were no significant changes.
- Weatherability: PC board can be -40 ℃ to 120 ℃ range to maintain the stability of the physical indicators.
- Anti-condensation: outdoor temperature of 0 ℃, indoor temperature of 23 ℃, indoor relative humidity less than 80%, the material
does not condensation the inner surface.