pc solid sheet

pc solid sheet

 

 

 

 

 

 

 

 

 

 

 

 

characteristic:

  • Impact resistance, not break: the strength of more than strengthen

the glass, acrylic plate hundreds of times, tough security, security, bulletproof the best

  •  Can be arched, can be bent: good processing, plasticity, according to the

actual site needs, bending into arched, semi-circular and other styles.

  •  Light weight, easy handling: only half the weight of glass, handling and

save time and effort, easy construction and easy management.

  • Weatherability, light gifted: long-term anti-ultraviolet radiation, lighting effects of excellent, can save a lot of savings.
  • Anti-condensation: outdoor temperature of 0 ℃, indoor temperature of 23 ℃, indoor

relative humidity less than 80%, the material does not condensation the inner surface.

  • Energy saving: summer cool, winter insulation, PC board is lower than the ordinary glass

and other plastic thermal conductivity (K value), insulation effect 7% -25% higher than the same

glass, PC board insulation up to 49%.

  • Sound insulation: PC board sound insulation effect is obvious, than the same

thickness of the glass and subgravity board has better sound insulation, in the same

thickness under the conditions of PC board insulation than glass increased 3-4DB.

  •  Flame retardant: the national standard GB50222-95 confirmed, PC board for

the flame level, that B1 level. PC board itself is 580 degrees Celsius ignition, self-extinguishing

from the fire, burning will not produce toxic gases, will not contribute to the spread of fire。

  • Transparency: P C plate light up to 89%, with the glass phase of the United States.

 

 

performance

A 。   Mechanical behavior

  •  impact strength: PC Nai Liban excellent impact resistance, and its impact resistance is

250 times the thickness of the glass, acrylic sheet is 30 times. Pc impact plate strength

as “transparent steel plate,” said.

  • good tensile strength, PC durability plate heat resistance, even at 120 ℃, its

tensile strength can reach 350kgf / cm2.

  • , bending strength: PC Nai Liban good bending, even if the bending angle of 90 °, still not broken.
  • anti-fatigue and creep resistance: PC endurance plate creep resistance in the

thermoplastic is the best. Even at high temperatures, its creep is still small.

B。 thermal performance

  • the melt temperature: PC Nail plate melting temperature 135 ℃, the

continuous use of the temperature of 120 ℃.

  •  linear expansion coefficient: linear expansion coefficient of 7 × 10-5cm / cm / ℃ in the plastic is small.
  •  brittle temperature: PC endurance brittle temperature of -40 ℃, the minimum continuous

use of temperature -30 ℃, is generally comparable to the plastic.

  • Flammability: PC Nai Liban is one of the flame-resistant self-extinguishing plastic, its

high temperature heating will not produce toxic gases.

  •  thermal conductivity: PC nailboard thermal conductivity and the general difference

is not plastic, is the glass 1/4, iron 1/300,Aluminum 1/1000, copper 1/2000, is one of the

excellent insulation properties of the material.
C。 optical performance

  •  light transmittance: PC Nai Liban plate light transmission rate of 85% or more with the glass quite.
  •  weatherability: general PC endurance sheet long-term exposure to outdoor, subject to

ultraviolet radiation can cause yellowing and surface degradation. Yawei PC Nai Liban surface with

a layer of anti-UV layer, even if the long-term exposure to the outdoor, its optical and mechanical properties

were no significant changes.

D。 sound insulation

PC Nai Liban sound insulation than the glass high 3-4DB, is the preferred material for high-speed barrier.

PC Nai Liban board has been Tianjin Light Rail Project, Wuhan Light Rail Project and many cities on the road

noise screen selection.

(5) chemical resistance

Polycarbonate has good resistance to weak acid, weak base and alcohol at room temperature, but it

is less resistant to strong acid, benzene, chlorinated hydrocarbons and esters, and is easy to dissolve, swell

or decompose phenomenon. Because of its resistance to chemical and temperature level, the size of the

internal residual stress and the length of exposure time, it should pay special attention before use.

 

 

 

Apply to:

  1. Garden, recreation venues singular decoration and resting place of the Pavilion Pavilion;
  2. Interior and exterior decoration of commercial buildings, curtain walls of modern urban buildings;
  3. Aircraft transparent container, motorcycle front windshield, aircraft, train, ship, car, motorboat, submarine and glass police shield;
  4. Telephone booths, advertising signs, light boxes advertising, display the layout of the exhibition;
  5. Instruments, meters, high and low voltage switchgear panels and military industries;
  6. Wall, top, screen and other high-end interior decoration materials;
  7. Highway and urban viaduct noise barriers;
  8. Agricultural greenhouses and greenhouses;
  9. Modern ecological restaurant ceiling;
  10. All units or areas within the bike shed, balcony sun awning and roof rest pavilion shed;
  11. Office buildings, department stores, hotels, villas, schools, hospitals, sports venues, entertainment centers and public facilities such as lighting roof.

    ghting roof.

 

Leave a Reply

Your email address will not be published. Required fields are marked *