Hot stamping color design for PVC PANEL(PVC Cielo Raso).

Hot stamping color design for PVC PANEL(PVC Cielo Raso).

Posted by Abby Van on Tuesday, March 14, 2017

 

Basic Info:
Name: PVC  board
Size: 20cm

Origin: Haining
Trademark: Oasis
Material: PVC
Specification: PVC

Advantages

Light weight, easy to install and clean.
Waterproof, Fireproof, soundproof and
corrosion resistance.
Durable, working life could be 30 years
No Paint, No need maintenance
Various color design for decoration
Price is cheaper.

Application

it is widely used for indoor
decorative, especially for ceiling
and wall. So it is also called pvc
ceiling panel or pvc wall panel.
1, kitchen and bathroom
2, warehouse and storage
3, restaurant and hotel
4, office and hospital.

Product features

 

1 Properties of waterproof, flame retardant, acid and alkali, mothproof, lightweight, heat insulation, sound insulation and damping.
2 and wood processing, and processing performance is far better than wood
3 is an ideal substitute for wood, aluminum, composite plate

 

performance

The general properties of PVC resin as a white or light yellow powder, the relative density of 1.35-1.45. The soft and hard degree of the product can be adjusted by adding the amount of plasticizer. The water absorption and permeability of pure PVC are very low.
Mechanical properties of PVC have higher hardness and mechanical properties. With the increase of molecular weight, but decreased with the increase of temperature. The mechanical properties of hard PVC are good, and its elastic modulus is 1500-3000MPa. While the soft PVC elastic 1.5-15 MPa. But the elongation at break up to 200%-450%. The friction property of PVC is general, the static friction factor is 0.4-0.5, the dynamic friction factor is 0.23.
The thermal stability of PVC is very poor, and it begins to decompose at 140 DEG C, and the melting temperature is about 160 DEG C. The linear expansion coefficient of PVC is small, it is difficult to burn, and the oxidation index is up to 45.
The electrical properties of PVC is a kind of polymer with good electrical properties, but because of its polarity, the electrical insulation is not as good as PP and PE. The dielectric constant, dielectric loss tangent and volume resistivity are large, and the corona resistance is poor.
The environmental performance of PVC is resistant to most inorganic acid, alkali and salt, most organic solvents. Suitable for medicine, chemical anti-corrosion material.

 

www.os-plastic.com
[email protected]

 

Leave a Reply

Your email address will not be published. Required fields are marked *